Home buyers say “yes” to these six switch upgrades when you offer useful, affordable wireless switch options.
1. MASTER SWITCH FOR ALL THE LIGHTS
Leaving lights on is a great way to burn watts and increase your power bill.
SAVE MONEY
Using a Levven Controls switch as a master switch that can turn all the lights off is extremely convenient. Not only do you lower your power bill, you get answer “yes” when you ask yourself “did I turn all the lights off?”
MAKE A MASTER SWITCH
Pair one Levven Controls switch with the Levven Controls controllers controlling your lights. Put master switches at the front and back door, in the garage or on a bedside table in the master bedroom.
2. ZONE SWITCH FOR MULTIPLE ROOMS
No one likes walking from room to room to turn lights on or off. Use a zone switch to set the lighting in one or more rooms.
ONE SWITCH, MULTIPLE ROOMS
Set a Levven Controls switch as a “zone controller” for more than one light (or more than one room).
Popular lighting zones are:
- exterior lights plus garage interior lights
- kitchen and dining room
- bedroom, closet and ensuite bath lights
- hall light and stairway lights
MAKE A ZONE SWITCH
Pair one Levven Controls switch with the two or more Levven Controls controllers you’ve used to control the lights. Put your zone switch on your wall or furniture; wherever convenient.
3. PORTABLE SWITCH FOR EXTERIOR LIGHTS
What if you had a zone switch for your exterior lights, but it was portable and you kept it clipped to the visor in your car? Or you kept it in your pocket or purse?
WIRELESS PORTABILITY
A long wireless transmitter range of 250 feet (75 meters) means a person can, yes, switch from their car.
SAFETY AND CONVENIENCE
Set your portable switch to control the controllers you’ve connected to your exterior and garage lighting. When you’re pulling up in your driveway, hit the switch and light up your house.
Now you can see your surroundings and safely enter the house.
4. REMOTE LIGHT SWITCH ON BEDSIDE TABLE
“What was that noise?” Sometimes you want to get up and take a look around at night. Don’t fumble in the dark – turn the lights on with the switch you keep on your bedside table. You can pair that switch with your bedroom, hallway, bathroom and stairwell lights.
LONG RANGE
The switch’s wireless range is 250 feet (75 meters), so you can turn the lights on in your yard without getting out of bed.
5. CLASSIC 3-WAY SWITCH
It happens all the time, right? You have a light fixture that you want to control from two switches. Maybe it’s a dining room chandelier that you want to control with a switch in the dining room and another by the kitchen door. Maybe you have a light in a long hallway that you want to control from either end.
TRADITIONAL WIRED 3-WAY
Doing a three-way switch with traditional wired switches is a little trickier than just a single switch. Both switches need to be wired together with what’s called a “traveler wire” to correctly energize the load. Depending on how far apart your wired switches are located, this could be a lot of extra wiring.
WIRELESS 3-WAY SWITCH
Levven Controls adaptable power control makes 3-way switches very fast. Bring power to the Levven controller and connect the controller to the load. Pair two Levven Controls switches to the controller. That’s it: both of those switches will turn that load on and off.
6. THE DREADED 4-WAY SWITCH
4-way switches are a little more rare than 3-way switches. 4-way switches are used when you want to control something with 3 or more switches.
TRADITIONAL WIRED 4-WAY
4-way switches can get a little confusing. All of your switches need to be connected in series. The first and last switches in the series will be 3-way switches with any number of 4-way switches added between them. If you’re diligent and you plan it well, you could get your 4-way switch connected correctly on your first try!
WIRELESS 4-WAY SWITCH
It only takes a few seconds to create a 4-way switch with Levven Controls. Bring power to the Levven Controls controller and connect the receiver to the load. Pair up to ten Levven Controls switches to the controller. That’s it: all ten of those switches will turn that load on and off.
SURPRISE! THE HOME BUYER
Traditional wired methods make these kinds of switches quite expensive. Master, zone switches and 4-way switches take a long time to install or require expensive home automation control hardware and programming.
Home buyers have said they’d like “smart home” features in their new house.
Surprise them with adaptable control features without changing how you design and sell homes (or increasing your price).
INFORMATION and OPPORTUNITY
Click here to request that a sales person contact you to explore Levven Controls for your business. You are free to pass on this information offer.
