Wire-Free Controls for Professionals

Levven Controls Pro (formerly GoConex Genius Pro)

Levven Controls Switch
levven wireless switches for wireless lighting and other wireless electrical control

Available in white (GSW) or Almond (GSLA), the Levven Controls wire-free, decorator-style switch finishes with a standard decorator wall-plate. The switch attaches to any surface; no holes, no switch boxes and no wire.

  • Sends and receives RF signals to and from controllers
  • Uses a common a 3V CR2032 lithium button battery and has a 10 year+ battery life
  • LED light indicates that the switch was turned on/off or that the battery is low
  • Works with any Levven Controls on/off or dimmer controller
Levven Controls Designer Switch
levven wireless designer switches for wireless lighting and other wireless electrical control

Available in white (PDKW) or Almond (PDKLA), the Levven Controls wire-free, decorator-style can be used as a single switch or up to four switches can be interlocked together creating a smaller form factor. This allows for a smaller switch “footprint” providing the opportunity for optimal switch placement; slim-design, attach it to any surface, no holes, no switch boxes and no wire.

  • Sends and receives RF signals to and from controllers
  • Uses a common a 3V CR2032 lithium button battery and has a 10 year+ battery life
  • LED light indicates that the switch was turned on/off or that the battery is low
  • Works with any Levven Controls on/off or dimmer controller
Levven Controls Designer Switch Face Plates

The Designer Switch Face Plates are used with the Levven Controls Designer Switch. This smaller form-factor design is screw-less, delivering a modern and elegant design.

  • A three-gang plate takes up the same wall space as a traditional single-gang plate
  • Works with any Levven Controls Designer Switch
  • Single-gang plates available in white (P1GW) and almond (P1GLA)
  • Two-gang plates available in white (P2GW) and almond (P2GLA)
  • Three-gang plates available in white (P3GW) and almond (P3GLA)
  • Four-gang plates available in white (P4GW) and almond (P4GLA)
Levven Controls Portable Switch (GPSK)
levven wireless remote switch for wireless lighting and other wireless electrical control

Coming in January 2019

For customers that want the ability to control their lights from their car, from their bed side table or from their person, the Portable Switch provides convenience and security.

  • Sends and receives RF signals to and from controllers
  • Uses a common a 3V CR2032 lithium button battery and has a 10 year+ battery life
  • LED light indicates that the switch was turned on/off or that the battery is low
  • Works with any Levven Controls on/off or dimmer controller
  • Comes with a clear silicone case, color strips to personalize the switch and a visor clip
Levven Controls Pro 10 Amp On/Off Controller (GPC10)
levven wireless receiver for wireless light switches and other wireless electrical control

The GPC10 controller fits into an existing switch box or junction box and uses secure RF signals from Levven Controls switches to turn power on and off to loads.

  • GPC10 can pair with to up to 10 switches
  • 250 ft. wireless range
  • 10 amps resistive load, 85 to 250V, 50/60Hz
  • 1200 watts incandescent, 720 watts compact fluorescent and LED, or 360 watts fluorescent
  • Works with motors up to 1/6 HP at 120V and up to 1/2 HP at 240V
  • Operating temperature: -40°C to 50°C
  • Indoor use only
Levven Controls 1.5 Amp Dimmer Controller (GPDT15)
levven wireless dimmer receiver for wireless light switches

The GPDT15 controller fits into an existing switch box or junction box and uses secure RF signals from Levven Controls switches to dim loads.

  • Can pair with to up to 10 switches
  • 250 ft. range
  • 1.5 amps resistive load, 85 to 277V, 50/60Hz
  • 180 watts incandescent, 120 watts compact fluorescent and LED, or 64 watts fluorescent
  • Works with motors up to 1/16 HP at 120V and up to 1/10 HP at 240V
  • Operating temperature: -40°C to 50°C
  • Indoor use only
Levven Controls 20 Amp On/Off Controller (GPC20)

The GPC20 controller attaches to the outside of an accessible junction box and uses secure RF signals from Levven Controls switches to turn larger power loads on and off (e.g. kitchen waste disposals and any loads that exceed the capacity of the GPC10).

  • Can pair with to up to 10 switches
  • 250 ft. range
  • 20 amps resistive load, 120 to 277V auto adjust
  • 15A tungsten, 15A Ballast
  • Works with motors rated up to 3/4 HP at 120 Volts, up to 2 HP at 240 Volts and up to 3 HP at 277 Volts
  • Operating temperature: -40°C to 50°C
  • Indoor use only
Levven Controls Q mobile access gateway

Levven Q is how mobile devices access every switch in the home.

  • Allows mobile device access and control
  • Free app available on the Android and Apple store
  • Name each switch and light for easy identification on the app
  • Turn lights on and off
  • Create lighting zones
  • Customize which lights a switch operates
  • See which lights are on in the home
  • Apply over-the-air updates to keep your system current
  • Operate on or off the cloud

Available in early 2019.

Levven Controls Decorator Switch Project Pack

Levven Controls Project Packs are pre-grouped GPC10 on/off controllers with GSW decorator-style switches. Each controller in the pack is pre-paired to one switch.

Project Packs deliver greater efficiency for new home and commercial installations. Simply wire the controller and attach the paired switch to the wall. New controllers can be added at any time using the simple three-step grouping and switch pairing process. Different quantities are available depending on the job.

  • 9-unit project pack. Switches in white (PP-9-W) or light almond (PP-9-LA).
  • 18-unit project pack. Switches in white (PP-18-W) or light almond (PP-18-LA).
  • 27-unit project pack. Switches in white (PP-27-W) or light almond (PP-27-LA).
  • 36-unit project pack. Switches in white (PP-36-W) or light almond (PP-36-LA).
  • 45-unit project pack. Switches in white (PP-45-W) or light almond (PP-45-LA).
  • 54-unit project pack. Switches in white (PP-54-W) or light almond (PP-54-LA).